TOP 10 TYPICAL FORKLIFT CRASHES , FORKLIFT PROCEDURE MUST FOCUS ON THESE MATTERS !.

Top 10 typical forklift crashes , forklift procedure must focus on these matters !.

Top 10 typical forklift crashes , forklift procedure must focus on these matters !.

Blog Article


Do not undervalue the forklift at work. If the operation is bad, there will certainly be serious mishaps in mins, and there are lots of crashes involving forklifts.

Case 1: The forklift freight obstructed the chauffeur's view, and the individual in front could not be located, leading to a rolling mishap.
Case 2: In order to keep the balance of the forklift when raising heavy goods, the staff members used their body weight as the weight, which nearly triggered casualties.
Situation 3: The size of the forklift freight exceeds the allowed width of the course and hangs on the roadside shelf, which practically triggers an crash.
Situation 4: Forklift is speeding and rolls over during a turn.
Situation 5: The forklift motorist did not see the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the personnel illegally, the forklift vehicle driver does not put on the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift rolls over.
Instance 7: The forklift chauffeur did not put on a seat belt and fell from the automobile when it surrendered and was crushed.
Forklift procedure must pay attention to these matters :.

Beginning.
1. Prior to starting, observe the environments, and after validating that there are no obstacles that hinder the safety of driving, beep the horn initially and afterwards begin.
2. For automobiles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) scale have to be safe prior to starting.
3. When the forklift begins with a lots, the motorist must first validate that the lots is secure and reputable.
4. The start should be slow and stable.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the mast should be tilted backwards. .
2. Do not raise the fork too expensive when driving. When entering and leaving the work site or while driving, be careful that there will certainly be no barriers in the sky. When the lots is taking a trip, the fork should not be elevated too expensive, which will certainly impact the stability of the forklift. .
3. After discharging, the fork should be reduced to the regular driving position before driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal should be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will certainly create the vehicle to lose lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to turn off the flame and slide, and it is prohibited to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to obey the traffic rules in the factory and need to maintain a specific safety and security range from the lorry ahead. .
7. When the forklift is running, the lots must remain in the most affordable position that does not hinder the driving, and the gantry should be correctly tilted back. The load shall not be raised other than when piling or filling. .
8. The elevation of the lots have to not block the chauffeur's sight. In unique circumstances, when the thing influences the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to switch on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it should drive safely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to depend on the fork to hold things and play a stabilizing role. .
12. If problems are located, they will certainly be repaired and reported in a prompt way, and they will never run with diseases or conceal them.

filling and discharging.
1. When fork-loading items, the range in between the two forks need to be changed as needed to make the lots of both forks balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is restricted to deal with a solitary fork or utilize a fork top or draw. In unique scenarios, safety indication should be set up to advise surrounding pedestrians. .
3. In the process of packing and unloading things, the forklift should be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork must be as deep as possible under the tons, and it should be noted that the fork pointer ought to not touch various other goods or items. The lots ought to be maintained with minimal back tilt of the gantry to ensure that the lots does not slide backwards. The pole can be tilted ahead a little when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and ram tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to stand around the fork, so as to prevent the collapse of the goods and injure individuals. .
8. Overloading is forbidden, and it is banned to utilize forks to raise employees to engage in high-altitude operations to prevent high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to utilize forks to choose, transform pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to unload the goods or lower the fork frame.
2. Pull the parking brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Remove the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the procedure of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leak ought to additionally be examined and the seals must be replaced in time.

Forklift Safety Operation Specifications.
1. You must examine prior to leaving the car;.
2. When you come across somebody in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo should be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be also sharp to avoid the propensity of " complimentary turning";.
6. Adding and down the slope needs to be sluggish and consistent, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is more than 10%, the car needs to be driven backwards when worsening;.
8. When the forklift workers lug the goods and progress, if they encounter big or hefty products and most likely to the chauffeur's view, they ought to take the turning around exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is Stand-on Electric Pallet Stacker not enabled.
2. It Electric Forklift Truck for Warehouse is not permitted to lift the goods for far away driving.
3. It is not permitted to pick up the goods by passing on the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia pressure to pick up the goods.
6. It is not enabled to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive laterally on slopes
.
Parking is not permitted under the list below problems.
1. Contours, slim roadways, railway crossings;.
2. Areas with a longitudinal slope higher than 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the area with the same length as the obstacle ought to be within 20 meters at each end.

Web:https://www.onenforklifts.com/
Email:[email protected]
Phone:+86 13827083844

Report this page